40 CH 100G DWDM Mux Demux

Sopofiber offers a full range of AWG products,Website:http://www.sopofiber.com, including 50GHz, 100GHz and 200GHz AWG. Here we present the generic specification for the 40-channel 100GHz AWG MUX/DEMUX component supplied for use in DWDM system.This component is designed for use within the C -band release of DWDM system. To decrease the power dissipation of the devices in different environmental conditions, the AWG package is special designed with selection of reliable thermal plastic with low thermal conduction, and the AWG operating temperature is controlled by using foil resist heater or Peltier TEC with thermistor temperature sensor. Different input and output fibers, such as SM fibers, MM fibers and PM fiber can be selected to meet different applications. We can also offer different package for different products, inluding ABS box and 19" 1U rackmount.Optical Specification  (Flattop AWG)ParametersConditionSpecsUnitsMinTypMaxNumber    of Channels 40 Number    Channel Spacing100GHz100GHzCha.    Center WavelengthITU    frequency.C -bandnmClear    Channel Passband ±0.1nmWavelength StabilityMaximum    range of the wavelength error  of all channels and temperatures in    average polarization.±0.05nm-1    dB Channel BandwidthClear    channel bandwidth defined by passband shape. For each channel0.4  nm-3    dB Channel BandwidthClear    channel bandwidth defined by passband shape. For each channel0.6  nmOptical    Insertion Loss at ITU gridDefined    as the minimum transmission at ITU wavelength for all channels. For each    channel, at all temperatures and polarizations. 4.56.0dBAdjacent    Channel IsolationInsertion    loss difference from the mean transmission at the ITU grid wavelength to the    highest power, all polarizations, within the ITU band of the adjacent    channels.25  dBNon-Adjacent,    ChannelIsolationInsertion    loss difference from the mean transmission at the ITU grid wavelength to the    highest power, all polarizations, within the ITU band of the nonadjacent    channels.30  dBTotal    Channel IsolationTotal    cumulative insertion loss difference from the mean transmission at the ITU    grid wavelength to the highest power, all polarizations, within the ITU band    of all other channels, including adjacent channels.22  dBInsertion    Loss UniformityMaximum    range of the insertion loss variation within ITU across all channels,    polarizations and temperatures. 1.01.5dBDirectivity(Mux    Only)Ratio    of reflected power out of any channel(other than channel n)to power in from    the input channel n40  dBInsertion    Loss RippleAny    maxima and any minima of optical loss across ITU band, excluding boundary    points, for each channel at each port  0.5dBOptical    Return lossInput    & output ports40  dBPDL/Polarization    Dependent Loss in ClearChannel    BandWorst-case    value measured in ITU band 0.30.5dBPolarization    ModeDispersion   0.5psMaximum    Optical Power   23dBmMUX/DEMUX    input/ outputMonitoring    range -35 +23dBmIL Represents the worst case over a +/-0.1nm window around the ITU wavelengthPDL was measured on average polarization over a +/- 0.1nm window around the ITU wavelength.Ordering Part Code SequenceAWGXXXXXXXXXXXX BandNumber of ChannelsSpacing1st ChannelFilter ShapePackageFiber LengthIn/Out ConnectorC=C-BandL=L-BandD=C+L-BandX=Customize16=16-CH32=32-CH40=40-CH48=48-CHXX=Special1=100G2=200G5=50GX=SpecialC60=C60H59=H59C59=C59H58=H58XXX=specialG=GaussianB=Broad    GaussiarF=Flat    TopM=ModuleR=RackX=Special1=0.5m2=1m3=1.5m4=2m5=2.5m6=3mS=Specify0=None1=FC/APC2=FC/PC3=SC/APC4=SC/PC5=LC/APC6=LC/PC7=ST/UPCS=Specify